EnviroDIY | Shannon Hicks | Mentions https://www.envirodiy.org/members/shicks/activity/mentions/ Activity feed mentioning Shannon Hicks. Wed, 15 Apr 2026 20:19:04 -0400 https://buddypress.org/?v= en-US 30 hourly 2 10aebf2ef63350d1c7be943698586b91 aqua replied to the topic Connecting Arduino MEGA or NANO with Teros 12 Sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/connecting-arduino-mega-or-nano-with-teros-12-sensor/#post-18843 Mon, 27 Jan 2025 22:11:56 -0500 @shicks Thank you so much its working perfectly fine now. Also if you could explain to me how to convert the RAW data of the sensor with the units of measurement I want it would be really helpful.

]]> f0daf142eab800e61569551d3e2de11d aqua replied to the topic Connecting Arduino MEGA or NANO with Teros 12 Sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/connecting-arduino-mega-or-nano-with-teros-12-sensor/#post-18838 Tue, 21 Jan 2025 18:16:58 -0500 @shicks Its working now. Thank you. But the issue is with the b_address_change sketch. This is the output.

13:12:30.112 -> ��fx������~�����x�f~������怘�f�f�f�f~~�ffx����憆���������f�~fxf���~����fx�������~f��x��������怘��f����f���~��x��fx�����������f~f�fx怘�������ff���ff��fx��xx��fx������x���fx�������~��xfx��~��x��fx���怘�f��fx�f�~��x��fx����怘

 

]]> 972f82ba918ea7da841fda68e95ec9eb aqua replied to the topic Connecting Arduino MEGA or NANO with Teros 12 Sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/connecting-arduino-mega-or-nano-with-teros-12-sensor/#post-18836 Tue, 21 Jan 2025 17:08:04 -0500 @shicks When I connect the tip-power, ring-ground, and sleeve-data Arduino IDE can’t read my port & the light on the Arduino Mega stops. What’s the reason? This is the output its giving me ”
<div>

12:06:33.721 -> Timeout value:

</div>
<div>

12:06:33.721 -> -9999

</div>
<div>

12:06:33.721 -> Powering up sensors,…

[Read more]

]]> 1a32c7e7059c7ac815543b3a8c425052 aqua replied to the topic Connecting Arduino MEGA or NANO with Teros 12 Sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/connecting-arduino-mega-or-nano-with-teros-12-sensor/#post-18834 Tue, 21 Jan 2025 14:02:34 -0500 @shicks I had a doubt related to the baud rate mentioned in the example sketches which is “115200” but for SDI-12 configuration of TEROS 12 its “1200”. Should I change it? Also if I change the address of the sensor will I be able to obtain data from the data logger provided by METER or do I have to set it to “0” each & every time I have to access…[Read more]

]]> 4d8797eb040af2829e10a82cb91743c5 aqua replied to the topic Connecting Arduino MEGA or NANO with Teros 12 Sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/connecting-arduino-mega-or-nano-with-teros-12-sensor/#post-18824 Wed, 15 Jan 2025 05:50:12 -0500 @shicks For now I want to connect one Teros 12 but in future want to connect four. Also I have both Mega & Nano with me. The output is an audio jack for which I have bought a trs 3.5mm breakout board. I just want to display the sensor data on my computer & use a esp module to display it on some website for future purposes

]]> a14163fd6a84693306f1e4a8d8229ce9 Braedon replied to the topic Controlling 12-volt heaters with a power relay in the forum Infrastructure and Equipment https://www.envirodiy.org/topic/controlling-12-volt-heaters-with-a-power-relay/#post-18633 Mon, 19 Aug 2024 18:54:47 -0400 @shicks I’m also going to be adding an air temperature sensor that has a 12-volt fan in the radiation shield. The fan can run at lower power by using pulse width modulation. I’m wondering if there might be a way to accomplish this with the power relay, since the fan will have to be connected directly to the battery like the heaters on my other…[Read more]

]]> fe7cb5103b8933bcb4e670e1e1f39aac Braedon replied to the topic Controlling 12-volt heaters with a power relay in the forum Infrastructure and Equipment https://www.envirodiy.org/topic/controlling-12-volt-heaters-with-a-power-relay/#post-18607 Thu, 01 Aug 2024 21:22:22 -0400 @shicks I wanted to run by what my thought process is with these relays and some of the questions I have now that I have purchased a few. I think my questions are general enough that you should be able to help me with them. I am looking to connect the Seeed relay to the D10-D11 grove terminal on the Mayfly. This would connect the relay’s SIG pin…[Read more]

]]> bcd5ffa8312807376ddff65860810ec1 Scott Ensign replied to the topic Continous HAB monitoring in the forum Mayfly Data Logger https://www.envirodiy.org/topic/continous-hab-monitoring/#post-18573 Fri, 12 Jul 2024 19:53:10 -0400 Yes, the Stroud Center has a Campbell Scientific phycocyanin sensor deployed on a Mayfly Data Logger. @shicks might be able to share code with you.

]]> adf53f5bbba9cc8c9a6b4b8e2a4a9ac5 Braedon replied to the topic Programming and troubleshooting Apogee SP-710 sensor in the forum Environmental Sensors https://www.envirodiy.org/topic/programming-and-troubleshooting-apogee-sp-710-sensor/#post-18392 Mon, 25 Mar 2024 16:53:06 -0400 @shicks this is something I am still struggling with, and I am having hard time figuring out. I’ve added some pictures with some of the data I’ve been collecting. It seems that the logger is picking up that there is some diurnal cycle happening, but the values seem to not match what I would expect, or they can be wildly all over the place. If I…[Read more]

]]> 6ad2a2eb054e29c3516e3226c2989959 neilh20 replied to the topic Monitoring power consumption in the forum Mayfly Data Logger https://www.envirodiy.org/topic/monitoring-power-consumption/#post-18210 Mon, 04 Dec 2023 18:25:26 -0500 @shicks surely the issue isn’t how long it lasts – it will always run  out of power at some point, or even worse batteries loose capacity, what was working decays – the issue is how to reliably recover when it has run out of available mA.  ?

The reliable bit – as in all engineering – is to add a buffer for real world component variations and t…[Read more]

]]> 5f10455ec14c130a8bbc75bc19875381 neilh20 replied to the topic Monitoring power consumption in the forum Mayfly Data Logger https://www.envirodiy.org/topic/monitoring-power-consumption/#post-18203 Fri, 01 Dec 2023 17:34:43 -0500 @shicks I agree it would be good to see the software. For my systems I look to have it last 14days before it reaches 3.8V and it is a difficult target unless its being tested for and the time taken on the radio is also characterized.

I see the issue is how to keep the sensor readings delivered reliably while there is enough power, and then when…[Read more]

]]> 84fb0bfae85d3980709dca88c61af2e2 Braedon replied to the topic How to determine battery and power supply in the forum Mayfly Data Logger https://www.envirodiy.org/topic/how-to-determine-battery-and-power-supply/#post-18057 Sat, 02 Sep 2023 00:42:14 -0400 Great idea! Thanks @shicks!

]]> b62e0ebec30c877332f060eae02dfff6 neilh20 replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-v1-1-technical-questions-forum-thread/#post-18049 Thu, 31 Aug 2023 19:21:31 -0400 Hi @shicks, just received two Mayfly 1.1 and noticed they are rev1.1B – just wondering what the differences are from  rev1.1A? 🙂

I did pull the circuit diagram from https://www.envirodiy.org/mayfly/hardware/ however the resolution is so low, its not all readable. Just wondering if there is a pdf version. 🙂

I also checked…[Read more]

]]> ea77ef8528ad414a7331452925da30d8 Braedon replied to the topic How to determine battery and power supply in the forum Mayfly Data Logger https://www.envirodiy.org/topic/how-to-determine-battery-and-power-supply/#post-18042 Wed, 30 Aug 2023 20:13:07 -0400 Awesome. The XBee module is an RF module, the XBee Pro S3B. I just remembered, while the apogee sensors I am using don’t require power to make measurements, they do require power for the internal heater. The pyrgeometer heaters, according to the datasheet, draw 15.4 mA and 185 mW at 12 VDC. The pyranometers draw 30.8 mA and 370s mW at 12 VDC. In…[Read more]

]]> f1318b3e355240f99fe766370271fb29 Sedhead started the topic Mayfly sketch compiles, seems to upload, but doesn't in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-sketch-compiles-seems-to-upload-but-doesnt/ Fri, 04 Aug 2023 22:13:00 -0400 I am using VSCode and Platformio to upload sketches to my Mayfly boards. The sketches compiled and uploaded fine two weeks ago.  Today, when I went to deploy the sensors, the code compiled fine and it even looked like it uploaded fine, except that the upload was way too fast. Usually there is a bit of a lag as the code is being written to the…[Read more]

]]> a8dd2f5c8b366e976a27b6f88b728ab2 Sedhead started the topic Get MMW data in real time? in the forum Monitor My Watershed https://www.envirodiy.org/topic/get-mmw-data-in-real-time/ Fri, 23 Jun 2023 19:52:10 -0400 @shicks @srgdamiano

Is it possible to get data from an MMW sensor in real time from the website, not by downloading the data as a .csv?  I’m looking for a way to grab data from some sensors and then plot them on a custom web app for our university.

Thanks!

]]> 11bc2bcbea3282a8d7cb1d80a0b15560 neilh20 replied to the topic LTEBee on Verizon? in the forum Mayfly Data Logger https://www.envirodiy.org/topic/ltebee-on-verizon/#post-17884 Tue, 13 Jun 2023 23:31:21 -0400 I think I found the answer by emailing support@rexV, since I got it from amazon.com Mar.2022 it wasn’t certified for Verizon.

This can be checked https://opendevelopment.verizonwireless.com/activation-troubleshooting

support@RexV said “RevX does not certify devices for use on M2M/IoT rate plans, rather the manufacturer registers the IMEI with…[Read more]

]]> 89dec57109a8190010ddb7b634dca2d5 James_NZ replied to the topic Hydros 21 Gen 2 -9992 values in the forum Environmental Sensors https://www.envirodiy.org/topic/hydros-21-gen-2-9992-values/#post-17721 Tue, 11 Apr 2023 20:30:42 -0400 Hi Shannon (@shicks),

Thanks for your reply, and apologies for not replying sooner.  My replies to your message are in bold:

  1. Do you have one of the Meter ZSC bluetooth interfaces for setting and checking Meter Group sensors? They’re really handy testing and troubleshooting things like their CTD sensors, and for changing the SDI12 address.  – <…

[Read more]

]]> 1fadbc57e232835bc43cd67905d44025 James_NZ replied to the topic Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a in the forum Environmental Sensors https://www.envirodiy.org/topic/please-help-meter-ctd-gen2-being-blocked-by-yosemitech-511-a/#post-17581 Thu, 02 Feb 2023 03:40:38 -0500 Hi @shicks and @srgdamiano.  You’re not going to believe it but the addition of the build flag below has fixed my problem, at least for the Gen2 sensors.

-D MS_SDI12_NON_CONCURRENT

I am certain it is this build flag and not the voltage pin (previously set to 5v) because I uploaded my script prior to switching the voltage pin over and it su…[Read more]

]]> 03549ccf44a2c730d2b92a842bfb85ea James_NZ replied to the topic Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a in the forum Environmental Sensors https://www.envirodiy.org/topic/please-help-meter-ctd-gen2-being-blocked-by-yosemitech-511-a/#post-17573 Mon, 30 Jan 2023 19:58:04 -0500 @shicks, would you mind publishing your Y-511a +  Gen 2 Hydros21 CTD code so I can ensure I haven’t done anything wrong on that front?

Thanks in advance.

James

 

]]> f0a536a364492e351fa215c9e35d1f79 James_NZ started the topic Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a in the forum Environmental Sensors https://www.envirodiy.org/topic/please-help-meter-ctd-gen2-being-blocked-by-yosemitech-511-a/ Fri, 27 Jan 2023 02:39:52 -0500 Hi everyone,

This problem has been causing me trouble for nearly a year, but it has become unworkable with installation of Gen2 Meter CTD sensors.

My problem: Meter CTD (SDI12) and Yosemitech 511-a Turbidity (MODBUS) sensors seem to interfere with each other causing the CTD to sporadically drop out return -9999 values. This only occurred at some…[Read more]

]]> 3e410ebefc32aca85dda91529fae5cfd Dave Bressler replied to the topic MayFly Data Logger During Winter in the forum Monitor My Watershed https://www.envirodiy.org/topic/mayfly-data-logger-during-winter/#post-17550 Thu, 19 Jan 2023 21:18:43 -0500 If you sensor is in water that is deep enough so that ice doesn’t form around the sensor itself then you should be ok.  If ice forms around a sensor itself that can be a problem.  The Meter Group Hydros21 CTD sensors have pressure transducers that can break if ice forms around the sensor.  The new model CTD seems to have a pressure transducer th…[Read more]

]]> e5642f18b8d8cec63aaf7ec83611736d dan@wachusett replied to the topic LTEBee on Verizon? in the forum Mayfly Data Logger https://www.envirodiy.org/topic/ltebee-on-verizon/#post-17540 Fri, 13 Jan 2023 16:47:07 -0500 @shicks, has anyone from Stroud contacted Verizon about this? I am also hitting a wall with adding the LTEBee modem to our Verizon account. The rep from Verizon that we work with is willing to speak with the device manufacturer to get them added to the Device Management Database. How do the LTEBee modems differ from the Digi modems such that…[Read more]

]]> b01d81aaef6bb3bbcd8436a2c26c42aa James_NZ replied to the topic Linking two Mayfly Boards Together in the forum Mayfly Data Logger https://www.envirodiy.org/topic/linking-two-mayfly-boards-together/#post-17376 Wed, 05 Oct 2022 21:26:48 -0400 Hi @shicks (and thanks @neilh20),

Thanks for that.  I am using a Yosemitech Y511-A with a Hydros CTD (Gen 1).  My code is fairly similar to yours.  I notice that you use pin 22 to power the Y511 (line 145) where I have ‘-1’.  I also don’t see the line ‘<span class=”crayon-i”>AltSoftSerial</span> <span cla…[Read more]

]]> eda157752bf44e218717e190334d78f7 James B replied to the topic LTEBee on Verizon? in the forum Mayfly Data Logger https://www.envirodiy.org/topic/ltebee-on-verizon/#post-17287 Tue, 30 Aug 2022 06:36:34 -0400 @mbarney, do you know if the REVX plan/sim card you had success with is the CATM version (50mb for $5) or the 4G version (10 mb for &12)? With the new modems I have not been able to register on the network (cereg 0,3) using the 4G plan and sim that worked for a couple years with the old xbee modem.

@shicks,  RevX systems technical support has…[Read more]

]]> 7039fa1869e4436bd725bbf5757086af Matt Barney started the topic Abnormally high battery voltage in the forum Mayfly Data Logger https://www.envirodiy.org/topic/abnormally-high-battery-voltage/ Fri, 29 Apr 2022 19:43:03 -0400 We have 2 stations we’ve recently deployed which are reporting ~7.5 volts during the day and 4.2V at night (graphs attached).

I suspect that the solar cable was accidentally plugged into one of the LIPO BATT ports (with the battery is plugged into the other LIPO BATT port). They’ll get that corrected asap, but I want to ask @shicks: Would this…[Read more]

]]> b57ba78f92e23c5be4605e264b423c93 EMayerRHA replied to the topic Data Uploading but not Publishing in the forum Mayfly Data Logger https://www.envirodiy.org/topic/data-uploading-but-not-publishing/#post-16897 Tue, 05 Apr 2022 17:54:46 -0400 What was the solution to the problem? We are having trouble with our location dot still being gray. It is clearly collecting data but is not displaying the numbers below the graph under last observation . @shicks

 

]]> 9f78a3fdcacd234dc68081d073185f97 Jim Moore replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-v1-1-technical-questions-forum-thread/#post-16807 Tue, 22 Mar 2022 01:14:26 -0400 @shicks.  I tested the converters you recommended and they appear to work as expected:

dropout voltage is 8 Volts and will support input voltage to 31.5 V (max on my bench PS).

No load draw is 3.64 mA at 12 V and 2.83 mA at 31.5 V.

A lower cost option is a three terminal non-isolated converter at $2.76 ea vs $12 for the PlusRoc.

]]> 1492a5353522ba9c650d7d6afb534ba5 Jim Moore replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-v1-1-technical-questions-forum-thread/#post-16745 Thu, 17 Mar 2022 03:19:28 -0400 Hi @shicks  I got my 5 pack of the v1.1 boards today and I noticed that:

  • Removed External/Lipo slide switch since it’s no longer needed

Does that mean I can no longer power the Mayfly from a 12 V supply?  I have an application for water sampling and the pumps run on 12V and they are controlled by the Mayfly so I can power the whole system wit…[Read more]

]]> 8d0a5f91f25e8a02dca894084b219d98 Dave Bressler replied to the topic TSV Graph Scale Issue in the forum Monitor My Watershed https://www.envirodiy.org/topic/tsv-graph-scale-issue/#post-16634 Mon, 28 Feb 2022 21:42:36 -0500 @jlemontu-org, yes as @shicks pointed out you or your colleague can follow up on this on ODM2DataSharingPortal Github issues page.

This is a known issue and I did already post to github about it, but if you want to add more info you can go to that post:  https://github.com/ODM2/ODM2DataSharingPortal/issues/551

]]> 4c25cf1e54e5ca520a9e7272ab0b9de8 James_NZ replied to the topic Hydros CTD-10 Regularly Dropping Out (-9999) in the forum Environmental Sensors https://www.envirodiy.org/topic/hydros-ctd-10-regularly-dropping-out-9999/#post-16497 Wed, 16 Feb 2022 19:24:39 -0500 @shicks, thanks for your help anyway Shannon.  @aufdenkampe, any insight on the code above would be greatly appreciated.

@neilh20, yes all setups are the same.  Some work fine, others have issues with dropping out.  I have spare Mayflies and a spare CTD, but no spare turbidity sensor.  Did you ever end up producing your Mayfly wings for the 0.5…[Read more]

]]> 5b9f1e11c4ec0f639e0e316067899cbd James_NZ replied to the topic Hydros CTD-10 Regularly Dropping Out (-9999) in the forum Environmental Sensors https://www.envirodiy.org/topic/hydros-ctd-10-regularly-dropping-out-9999/#post-16482 Wed, 16 Feb 2022 03:05:19 -0500 Hi @shicks.  I’m just wondering if you saw anything in the code above that might be causing this problem?

Regards,

James

 

]]> b097ddb9c16fdc6f533864cec234999a James_NZ replied to the topic Hydros CTD-10 Regularly Dropping Out (-9999) in the forum Environmental Sensors https://www.envirodiy.org/topic/hydros-ctd-10-regularly-dropping-out-9999/#post-16445 Mon, 14 Feb 2022 08:19:50 -0500 Hi @shicks and @neilh20

I’m leaning more towards an interaction with the MODBUS wing.  I had one station that produced -9999’s constantly when the Turbidity sensor was plugged in, and operated fine when I removed the MODBUS wing.  This drove me nuts until Anthony pointed me towards the complex loop code where I set the Turbidity sensor to low a…[Read more]

]]> 7f49c0b723a993d89161d7a43a3a77d6 Jim Moore replied to the topic Errors compiling DRWI_SIM7080LTE.ino code in the forum Mayfly Data Logger https://www.envirodiy.org/topic/errors-compiling-drwi_sim7080lte-ino-code/#post-16331 Sat, 29 Jan 2022 02:36:05 -0500 @shicks

I emailed the sketch and the associate pio .ini file.

Thanks for looking into this.

]]> 2e0af49a3211cb32cc502db09ce5527e Zeke Holloman started the topic Mayfly I2C Address in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-i2c-address/ Wed, 26 Jan 2022 22:53:46 -0500 @srgdamiano @shicks @neilh20

 

Hi there! Does the Mayfly have an I2C address associated with it? I’m trying to use Wire.h to transmit data between two Mayflys. If it does, where could I find it, for both the 0.5b and the 1.0. Thank you!

]]> 015f12a6388f816a7a94963aa334015a neilh20 started the topic Mayfly 1.0 Qu in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-1-0-qu/ Wed, 26 Jan 2022 22:49:39 -0500 @shicks just wondering what the expected standard charge is for the Mayfly 1.0

I’m seeing via a USB Meter that with a USB-C charger that delivers 5.0V (and 2A capable) with a  4.4A LiIon battery at 3.8V that it is only charged 0.13-0.2A.   Previously Mayfly 0.5 this was the expected 0.5A

Digging deeper into the BQ24074

“Input-based dynamic po…[Read more]

]]> 5a86bb10d1bef146378255755039d863 neilh20 replied to the topic RS485 Schematic in the forum Mayfly Data Logger https://www.envirodiy.org/topic/rs485-schematic/#post-16295 Thu, 20 Jan 2022 22:04:06 -0500 @shicks just wondering if the RS485 schematic is likely to be published, and of course if the parts are likely to be available. Many thanks.

]]> 31eb536ea0f3a66755f76fff5a777e53 neilh20 started the topic RS485 Schematic in the forum Mayfly Data Logger https://www.envirodiy.org/topic/rs485-schematic/ Fri, 14 Jan 2022 17:07:15 -0500 HI @shicks, just wondering could you post the schematic/parts on the “RS-485 Half-shield”

https://www.envirodiy.org/product/envirodiy-rs-485-half-shield-pack-of-5/  Says “Product expected to be in stock and ready for purchase in mid-October.”

Do you have any availability on it, and also when there might be a working +12V boost ~ very broadly Q2…[Read more]

]]> 2370d79ecaf236f95bdd581aa8856cde Matt Barney replied to the topic Voltage divider on multipurpose screw adapter in the forum Mayfly Data Logger https://www.envirodiy.org/topic/voltage-divider-on-multipurpose-screw-adapter/#post-16254 Wed, 12 Jan 2022 22:20:53 -0500 After probing the screw term adapter, I don’t think that it will work for my purposes as I described above. If I’m correct, the way the adapter’s voltage divider works is this: When the S1 jumper is set to Res-Div and two matched resistors are installed on the S1 side of the adapter, the voltage output on the Grove’s D1 pin will be half of the…[Read more]

]]> a8bcb03b1e423cb43672ea0d0aa8e2db Zeke Holloman replied to the topic Connecting SIM7080 to New Thingspeak in the forum Mayfly Data Logger https://www.envirodiy.org/topic/connecting-sim7080-to-new-thingspeak/#post-16244 Fri, 07 Jan 2022 22:03:28 -0500 @neilh20 @shicks @vogelrnws

Hi all! Thank you for all of your feedback and tips! I spent some time this week looking at the mqtt3.thingspeak.com server and I was able to get a channel up and running on it.

Overall, it’s not drastically different than mqtt.thingspeak.com. The main aspect being removed in the legacy Thingspeak server is the API…[Read more]

]]> d7de1b4f4c1291e4b02c932ea29ebb62 Zeke Holloman started the topic Connecting SIM7080 to New Thingspeak in the forum Mayfly Data Logger https://www.envirodiy.org/topic/connecting-sim7080-to-new-thingspeak/ Wed, 05 Jan 2022 21:33:54 -0500 @neilh @shicks @vogelrnws

Hi there! I recently received an email from Thingspeak stating that they are planning on shutting down their legacy Thingspeak server this month. I’m working to convert my Thingspeak channels over to from mqtt.thingspeak.com to mqtt3.thingspeak.com.

I’m using a Mayfly v1.0 alongside you all’s SIM7080 card. It publishs…[Read more]

]]> dda40c275bd5579345712a5fb7a30253 Zeke Holloman replied to the topic Trouble locating information on new LTEBee in the forum Mayfly Data Logger https://www.envirodiy.org/topic/trouble-locating-information-on-new-ltebee/#post-16096 Thu, 04 Nov 2021 14:37:41 -0400 @shicks Aaaah, sorry to hear that. Hopefully the fix won’t be too bad.

Thanks for posting that code so quickly! I didn’t have time to look at it until today. I had an older version of Modular Sensors downloaded and so I tried running it with the code you sent and with a few edits in order to get it logging to thingspeak, it was practically plug…[Read more]

]]> 9246a4ee1a020ba3a6f68178ff82837c Zeke Holloman started the topic Trouble locating information on new LTEBee in the forum Mayfly Data Logger https://www.envirodiy.org/topic/trouble-locating-information-on-new-ltebee/ Tue, 02 Nov 2021 21:53:24 -0400 Hi there! Sorry, I know this is a silly topic to start an entire thread after, haha. Was any example code regarding the new Enviro LTEBee’s running off of SIM7080. I was having trouble locating it (I’m still learning Github).

@shicks

@neilh20

]]> 71451f659833f5df7f5712f5cfa4df1d Zeke Holloman replied to the topic USB to UART Mayfly, Serial Ports Not Connecting in the forum Mayfly Data Logger https://www.envirodiy.org/topic/usb-to-uart-mayfly-serial-ports-not-connecting/#post-16090 Mon, 01 Nov 2021 21:22:06 -0400 Hey @shicks. Thanks for the lightning fast response.

That worked! Just had to download it from the link you sent.

Really excited to start working with the v1.0! Thank you all for your great hardware, communication, documentation, and quick responses!

]]> 73a59bb7cf2be16c596cf262b357640e Zeke Holloman started the topic USB to UART Mayfly, Serial Ports Not Connecting in the forum Mayfly Data Logger https://www.envirodiy.org/topic/usb-to-uart-mayfly-serial-ports-not-connecting/ Mon, 01 Nov 2021 15:55:38 -0400 Hi there! I recently purchased some Mayfly v1.0’s and was working to get them set up. I’m using Atom, alongside PlatformIO.

I’m trying to get some basic Hello world code running on the Mayfly, but I’m having some issues connecting to them, specifically connecting to the serial ports. The –port selection is blank, and highlighted blue (Pictures…[Read more]

]]> ce400b649b7374b7a5bff419c7f8cb90 neilh20 commented on the post, New Mayfly Data Logger and Accessories https://www.envirodiy.org/new-mayfly-data-logger-and-accessories/#comment-502 Fri, 22 Oct 2021 18:03:52 -0400 @shicks – I wonder could you provide a technical list of target/designed functional specs and what is tested and what hasn’t. Its pretty standard to be transparent for a new product, and to list the issues […]

]]> c49bd92e5d47f642e3ea078ae3744d14 neilh20 started the topic JTAG on Mayfly in the forum Miscellaneous https://www.envirodiy.org/topic/jtag-on-mayfly/ Thu, 14 Oct 2021 17:07:07 -0400 Has anybody seen a Mayfly freeze or got any thoughts on debugging it when frozen, or used the JTAG/Mayfly.

I’ve got an occurrence of a Mayfly frozen, and its about the 4th captured occurrence of it.
In each of the 4 cases I’ve had the FTDI connector on it, with the terminal capture program providing a time stamp, and latest is:

[2021-10-13…[Read more]

]]> 43219120cd0b8705ecbfcb208392f5fb neilh20 replied to the topic How Do I Order The New Mayfly Monitor from Shop in the forum Mayfly Data Logger https://www.envirodiy.org/topic/how-do-i-order-the-new-mayfly-monitor-from-shop/#post-16043 Tue, 05 Oct 2021 22:54:51 -0400 Always a lot of work getting a new revision out and running compatibility tests. I always admired the way
Paul Stoffregen of PRJC created a fishbowl for the releases, one I remember with the Teensy had a process of managing/advertising the release and being clear about it being in beta https://forum.pjrc.com/threads/27689-Teensy-LC-Beta-Testing

@s…[Read more]

]]> facf4ef35c646a1d342279c298303846 neilh20 replied to the topic Mayfly Availability in the forum Mayfly Data Logger https://www.envirodiy.org/topic/mayfly-availability-3/#post-15847 Mon, 30 Aug 2021 17:35:28 -0400 Hello @shicks.  Just wondering if you can give any insight as to the process, when you think you might be able to tell us about what the new revision looks like, or possibly any visibility on when it might be available, and the process gates you are going through.  I realize some times this is a bit like asking how long is a piece of string, and h…[Read more]

]]> dcd0c03316bb69ecded7e7103bdc3563 Zeke Holloman started the topic Using Xbee Cellular Modem with ThingSpeak in the forum Mayfly Data Logger https://www.envirodiy.org/topic/using-xbee-cellular-modem-with-thingspeak/ Tue, 27 Jul 2021 18:58:58 -0400 Hi all! I’m working on developing a water monitoring station using a Mayfly board, an Xbee cellular modem (XBC LTE-M/NB-IoT Global), the LTEBee adapter, a solar panel, and a Hydros-21 sensor. I saw that you all had already written some Arduino code for logging to ThingSpeak, so I’m using that. I had some issues getting the modem to connect to the…[Read more]

]]>