-
Sara Damiano replied to the topic Problems with libraries on the Mayfly Data Logger in the forum Mayfly Data Logger 2 years, 1 months ago
The instructions for manual installation on the https://www.arduino.cc/en/Guide/Libraries are telling you how to find the right location to put the unzipped folder. Once you have the right folder, you cut and past the files. That’s it.
To update libraries, the easiest way is to delete everything in the library folder and re-download.
Can you c…[Read more]
-
Sara Damiano replied to the topic Pin locations for Yosemitech Y510-B in the forum Mayfly Data Logger 2 years, 3 months ago
Changing the address via the Yosemitech library is not hard. I would strongly recommend you do that rather than mess with two adapters and two serial lines. No matter what, I’m positive that the default addresses are not
0x04
or0x0B
as you have them coded. Those are just my favorite addresses for them.If you really want two separate co…[Read more]
-
Sara Damiano replied to the topic Pin locations for Yosemitech Y510-B in the forum Mayfly Data Logger 2 years, 3 months ago
There’s no enable pin broken out, so it must have automatic flow control. That’s what you want. This one, right: https://www.amazon.com/ALMOCN-Adapter-Module-Converter-Indicator/dp/B09998FY4X?th=1
You said:
Currently the RS485 wires connected to the Y510-B into the mayfly are as follows: GND to GND, RXD to D11, TXD to D8, and VCC to sv5.
If th…[Read more]
-
Sara Damiano replied to the topic Connecting SIM7080 to New Thingspeak in the forum Mayfly Data Logger 2 years, 3 months ago
Sorry, I coded up the ThingSpeak publisher ages ago only to prove to myself that I could get an MQTT publisher working. I’ve never used it beyond that. I don’t have a paid account so after the trial period I was locked out and I’m not willing to do much testing on an account tied to my personal email.
Anyway, the code for ThingSpeak is in the…[Read more]
-
Sara Damiano replied to the topic Pin locations for Yosemitech Y510-B in the forum Mayfly Data Logger 2 years, 3 months ago
AltSoftSerial only works on pins 5 and 6. That’s why there’s no place in the code to declare the Tx and Rx pins. It’s strictly limited to those two.
<div dir=”auto”></div>
<div dir=”auto”>Is there a reason you have the two sensors on separate RS485 adapters and power supplies? I’m fairly certain that the two sensors operate on the same supply…[Read more] -
Sara Damiano replied to the topic Uploading file in the forum Mayfly Data Logger 2 years, 3 months ago
It’s been a while since I’ve used Atom. Are you sure the program is compiling without errors and actually being uploaded? If there are errors in the build, it won’t actually be uploaded.
-
Sara Damiano replied to the topic Adding AtlasSci Sensors to MMW in the forum Monitor My Watershed 2 years, 4 months ago
Done. Sorry for the delay. Let me know if you have any issues adding a sensor.
-
Sara Damiano replied to the topic Adding AtlasSci Sensors to MMW in the forum Monitor My Watershed 2 years, 4 months ago
The conductivity probe was already there. I’m adding pH now.
-
Sara Damiano replied to the topic Modular Sensors wifi connection on university (or similar) network in the forum Miscellaneous 2 years, 9 months ago
I’m not sure if it’s possible – or if it is, it’s not going to be easy. When you log in with your phone or your computer, you go through a series of browser pages where you submit form data with your credentials, etc. I would guess that you’d have to manually figure out what the URL for each of those pages is and manually create each of the p…[Read more]
-
Sara Damiano replied to the topic Helium Network- Compatibility with Mayfly in the forum Mayfly Data Logger 2 years, 10 months ago
I haven’t looked into it much, but I would guess that module, and several other bee-shaped LoRaWAN modules would work just fine with the Mayfly. There is *not* any direct support for any sort of radio communication right now in ModularSensors. I would love to have support for it, but still a “someday” feature right now. Right now most of our st…[Read more]
-
Sara Damiano replied to the topic Stability Testing ~ how to do it? in the forum Mayfly Data Logger 2 years, 12 months ago
No, I don’t think I’ve seen that.
-
Sara Damiano replied to the topic Testing power consumption in the forum Mayfly Data Logger 3 years ago
I’d put it in the power up, since it’s supposed to happen right away and setting the pin is nearly instant and won’t slow down other things powering up.
-
Sara Damiano replied to the topic SDI-12 & LT500 in the forum Mayfly Data Logger 3 years ago
I added 10 extra ms of wake time in v2.1.3. You can revert everything back to the original by adding a second argument of 0 to your send command functions.
-
Sara Damiano replied to the topic 504 Response Code in the forum Mayfly Data Logger 3 years ago
Doh, yes, Shannon’s right! I didn’t look closely enough before I deleted it, but there probably is a missing UUID!
Looking back, I replaced all the UUID’s with <<REMOVED>> for you so because you probably don’t want those to be public. I can’t see or revert it to the original, but looking at it, your last measurement has just
"":-9999}
so it l…[Read more] -
Sara Damiano replied to the topic 504 Response Code in the forum Mayfly Data Logger 3 years ago
Hmm. Does Hologram show any data being transferred?
Monitor My Watershed is known to sometimes drop or not respond for no apparent reason. But usually if one station is working all the time and another isn’t it’s either the UUID and tokens or the internet connection. When you’re looking at MonitorMW, are you seeing anything at all? The num…[Read more]
-
Sara Damiano replied to the topic 504 Response Code in the forum Mayfly Data Logger 3 years ago
I should add that we haven’t figured out why some connect right away and others don’t. So even with an apparently identical batch of sims and modems, it wouldn’t surprise me if some connect immediately and others don’t.
I removed the UUID’s from your post.
-
Sara Damiano replied to the topic 504 Response Code in the forum Mayfly Data Logger 3 years ago
Do you see any connections or activity from the SIM cards on Hologram? Sometimes it takes a really long time to connect to the network with a new SIM card, a new modem, or at a new location.
Are you sure your tokens and UUIDs are all correct?
-
Sara Damiano replied to the topic Major Set Back-Need Help! in the forum Mayfly Data Logger 3 years, 1 months ago
Woops. The invalid version number was my fault; I screwed up the semantic versioning. I released a new version yesterday which is identical except for the version number which is now a valid 0.28.3.
But that isn’t actually your problem. The invalid version number and the stuff about “requestFrom…” are just warnings. It compiled anyw…[Read more]
-
Sara Damiano replied to the topic New sensor request in the forum Environmental Sensors 3 years, 1 months ago
Done
-
Sara Damiano replied to the topic Testing power consumption in the forum Mayfly Data Logger 3 years, 1 months ago
I would do as Neil suggested and make sure the trigger pin for the Turner is set low before sleep.
We’ve had the same problem with RS485 adapters that pull power through the Tx/Rx lines. Because the stop bit is high those lines will stay high if you don’t force them low at the end. It’s kind-of a PITA with the Tx/Rx bits; you have to actually w…[Read more]
- Load More