Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Logging data from Milone eTape

Home › Forums › Environmental Sensors › Logging data from Milone eTape › Reply To: Logging data from Milone eTape

2025-04-15 at 2:57 PM #19040
Eric Booth
Participant

    Sorry for the delay. I’m planning to use it in an H-flume that has a maximum depth of 0.45 meters. It looks like precision is listed as 0.25 mm but I’m okay with accuracy closer to 2 mm.

    And thanks for the sensor range info. I’ll plan to install the eTape in a probe well attached to the flume that extends below the flume entrance elevation. I will plan to test it for changes in temperature (air and water).

    I’m hoping to power it directly from the MayFly with a LIPO battery. And yes, I’m hoping to lean on the ModularSensors library even though the eTape sensor is not listed as a supported sensor: https://github.com/EnviroDIY/ModularSensors?tab=readme-ov-file#supported-sensors

    Any help on how to navigate that process? Thanks in advance!