Reply To: Continous HAB monitoring

I spoke too soon. The Campbell ClariVUE10 eventually developed interval reporting issues with the last library that I mentioned above so I copied the libraries from my old computer onto my new computer because it was the last set of libraries that didn’t have issues. But now it is having interval reporting issues too and the CTD sensor readings have spikes in the data. Here is my site: https://monitormywatershed.org/sites/TWI_WargoPondHAB/

When I first started setting up the data logger with the 3 sensors (Meter CTD, Campbell ClariVUE10, and Turner C-Flour Phyco), I used my old laptop to program the board. The library was from 04/2022 but I had to replace the CampbellClariVUE.h file with a more recent updated version. It seemed like the most stable out of the other libraries.

I think this is my third or fourth library iteration. All of the latest libraries seem to have issues where we need to revert back to older versions. I’m going to try to re upload the sketch from my old laptop next to see if it fixes the problem.

Is there something else I should be looking at? The voltages for the current sensors are: Meter CTD 3V, Campbell ClariVUE10 12V, and Turner C-Flour Phyco 5V.

thank you.