Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of Home › Forums › Mayfly Data Logger › Grove 4 pin terminal board › Reply To: Grove 4 pin terminal board
2023-03-14 at 4:21 PM
#17688
To close the jumper on the Mayfly, you need a soldering iron. If you don’t have access to one of those, you might need to go back to the trinket.
You could also order a replacement pendant log
To close the jumper on the Mayfly, you need a soldering iron. If you don’t have access to one of those, you might need to go back to the trinket.
You could also order a replacement pendant logger from Onset: https://www.onsetcomp.com/products/data-loggers/ua-003-64
