Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Campbell Scientific CS-215 SDI-12 communication issues w/ Mayfly

Home › Forums › Mayfly Data Logger › Campbell Scientific CS-215 SDI-12 communication issues w/ Mayfly › Reply To: Campbell Scientific CS-215 SDI-12 communication issues w/ Mayfly

2018-07-23 at 5:19 PM #12328
David Lutz
Participant

    Sara,

    Just to loop back – we were in touch with Campbell and their suggestion was also along the lines of the 3.5V voltage requirement. In the meantime, we picked up a Meter Group (formerly Decagon) ATMOS-14 sensor which collects temp/RH/VP and it worked perfectly. Since we only had to install one, we just went with that.

    We’ll try to figure this out this fall/winter and once we do, I’ll make sure to update this thread for others!

    Dave