Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Sketch for rain gauges (SDI 12 interface)

Home › Forums › Environmental Sensors › Sketch for rain gauges (SDI 12 interface)

Tagged: 

Viewing 2 reply threads
  • Author
    Posts
    • 2024-07-30 at 9:55 AM #18597
      D_Manning
      Participant

        Would anyone have a Mayfly sketch for rain gauges such as METER’s ECRN-50 or -100 or Campbell’s Rainvue 10 (i.e., SDI 12 interface)? If it incorporates an Adafruit Trinket, all the better, but if it doesn’t, no problem.

      • 2024-08-05 at 8:41 AM #18612
        BrianJastram
        Participant

          I use Texas Electronics rain gauges https://texaselectronics.com/tipping-bucket-rain-gauges/ and a ProTrinket with the Mayfly for my precipitation monitoring. It looks like your rain gauges also operate with a reed switch.

           

        • 2024-08-06 at 7:02 PM #18623
          D_Manning
          Participant

            Thanks, Brian. What I’m really looking for is the Mayfly sketch, one specifically for an SDI 12 interface.

        • Author
          Posts
        Viewing 2 reply threads
        • You must be logged in to reply to this topic.