Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of Home › Forums › Mayfly Data Logger › XBee and Hologram LTE: issues connecting to internet › Reply To: XBee and Hologram LTE: issues connecting to internet
2020-12-23 at 2:29 PM
#14974
And here’s the bypass output. I think this worked! Any idea why, and how I could transfer to my modular sensors code?
James
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 |
[6008] Putting XBee into command mode... [7133] Setting I/O Pins... ATD81 ATD91 ATD71 ATD51 ATP01 [7227] Setting Sleep Options... ATSM1 [7245] Setting Other Options... ATDO0 ATP10 [7284] Making sure airplane mode is off... ATAM0 [7303] Turning on Bypass Mode... ATAP5 ATWR ATAC [7385] Resetting the module to reboot in bypass mode... ATFR [7903] Attempting to reconnect to the u-blox SARA R410M module... [7905] ### TinyGSM Version: 0.10.6 [7907] ### TinyGSM Compiled Module: TinyGsmClientSaraR4 AT AT AT AT ␀AT AT AT AT AT AT AT AT AT AT AT OK ATE0 OK AT+CMEE=2 OK AT+CGMI u-blox OK AT+GMM SARA-R410M-02B OK [12443] ### Modem: u-blox SARA-R410M-02B [12443] ### Modem: u-blox SARA-R410M-02B AT+CTZU=1 OK AT+CPIN? +CPIN: READY OK AT+CGMI u-blox OK AT+GMM SARA-R410M-02B OK [12701] ### Modem: u-blox SARA-R410M-02B [12703] Setting Cellular Carrier Options... AT+CFUN=0 OK AT+UMNOPROF=1 OK AT+URAT=7,8 OK AT+UBANDMASK=0,134217732 OK AT OK AT+CFUN=15 OK [16013] ### TinyGSM Version: 0.10.6 [16013] ### TinyGSM Compiled Module: TinyGsmClientSaraR4 AT ␀␀AT AT AT AT OK ATE0 +CPIN: READY OK AT+UMNOPROF? +UMNOPROF: 0 OK [17674] Scanning for networks. This may take up to 3 minutes AT+COPS=0 OK AT+COPS=? +COPS: (1,"530 05","530 05","53005",8),(1,"530 01","530 01","53001",8),(1,"530 01","530 01","53001",9),,(,23)(12 K[197736] ### Unhandled: +COPS: (1,"530 05","530 05","53005",8),(1,"530 01","530 01","53001",8),(1,"530 01","530 01","53001",9),,(,23 )(12 K [197742] Waiting for network registration AT+CEREG? +CEREG: 0,1 OK AT+CCID +CCID: 8964050087214794989 OK [197879] CCID: 8964050087214794989 AT+CGSN 356726104223995 OK [197937] IMEI: 356726104223995 AT+CIMI 530058721479498 OK [197996] IMSI: 530058721479498 AT+COPS? +COPS: 0,0,"Spark NZ Spark NZ",8 OK [198080] Operator: Spark NZ Spark NZ AT+CGPADDR=1 +CGPADDR: 1,100.103.173.237 OK [198158] Local IP: 100.103.173.237 AT+CPWROFF OK [198199] Powering down. |
