Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Jake Lemon

Forum Replies Created

Viewing 10 posts - 11 through 20 (of 20 total)
  • Author
    Posts
  • in reply to: Status update on MMW? #16175
    Jake Lemon
    Participant

      Hi Anthony. Will the cache-busting code negate the need for MMW users to clear their cache to view sparklines? And if so, do you have an estimate on when you’ll be doing the next update? I’m debated whether to suggest to our volunteers/partners that they clear their cache in order to view sparklines.

       

      Thanks!

      in reply to: 502 Bad Gateway on MMW #15686
      Jake Lemon
      Participant

        Appears to be back up now.

        in reply to: Beaver/Muskrat Damage? Vandalism? #14300
        Jake Lemon
        Participant

          What a bummer Christa! I’m pretty sure my damage was a case of vandalism as well. The cut seems too clean to be critter related. The station was on private property but there is public access a quarter mile downstream. I wasn’t previously concerned about vandalism here though. I’m unsure how to mitigate that risk moving forward. Signage? Trail cams?

          in reply to: Debug flags for modem comms #13725
          Jake Lemon
          Participant

            I’m curious, were those LTE XBee3’s deployed in the field, worked properly then at some point stopped connecting to the internet? Or did you receive them and realize they wouldn’t connect upon initial testing? Just wanting to understand if this is something I need to watch out for with our LTE stations we’ve already deployed.

            Thanks

            in reply to: Mayfly clock and battery #13645
            Jake Lemon
            Participant

              The SD card did have data. I left the SD card in  long enough to complete one measurement. Attached. I then removed the SD card and took it home to look at the data, but left the station running without an SD card because I didn’t have a backup on me at the time.

              in reply to: Mayfly Dissolved Oxygen Sensor #13245
              Jake Lemon
              Participant

                Hi All,

                Just following up on this. Shannon and I have exchanged emails off of the forum about setting up the Mayfly to work with the Yosemitech Sensor. Shannon, I’m curious as to the status of this?

                Thanks,

                Jake

                in reply to: Sending Data Through Verizon Network #13232
                Jake Lemon
                Participant

                  Thanks Shannon! I’ll see what I can do.

                  in reply to: Parameter Threshold Notifications #12911
                  Jake Lemon
                  Participant

                    Thanks Adam!

                    in reply to: Continuous Phosphorous Monitoring #12907
                    Jake Lemon
                    Participant

                      Thanks Scott!

                      in reply to: Mayfly Dissolved Oxygen Sensor #12896
                      Jake Lemon
                      Participant

                        Thanks for the great info all!

                        If I were looking to add the Yosemitech standard model to a Mayfly Station with a CTD and Campbell Turbidity sensor would I need to enhance the power capability? Bigger battery…bigger panel? Do you have code for the Yosemitech? Are there other considerations I need to take into account?

                        Thanks again.

                      Viewing 10 posts - 11 through 20 (of 20 total)