All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here
Community Activity See all activity
Kiersten started the topic MayFly Pin On/Off Communication in the forum Mayfly Data Logger 7 months ago
I am using a MayFly to control pumps in a water sampler to pump water for specified timeframes. I have the battery powering the pumps and a converter to power the board.
I have my hardware system set up, and I have checked the voltages and battery and pins throughout the system, with reason to believe that my problem is not because of any wiring.…[Read more]
Kiersten became a registered member 7 months ago
Kiersten
@kjmaxwel
Discovery_Center started the topic Can't Upload Data "This file corresponds to another site." in the forum Monitor My Watershed 7 months, 2 weeks ago
How am I supposed to format my CSV file to upload my data? I keep getting the same error message
<div class=”mdl-snackbar__text”>”Failed to upload data. This file corresponds to another site.”</div>
Shannon Hicks replied to the topic Issues with Digi XBee 3 Global Modems in the forum Mayfly Data Logger 7 months, 2 weeks ago
Did you make the changes to the Mayfly’s solder jumpers and sketch? There’s a discussion about the necessary changes here: https://www.envirodiy.org/topic/digi-ltebee-on-mayfly-v1-x/
caroline@wachusett replied to the topic Issues with Digi XBee 3 Global Modems in the forum Mayfly Data Logger 7 months, 2 weeks ago
Hi Shannon,
We are using the Mayfly version 1.1 board to test the Digi modems. The specific Digi modem we are testing is linked…[Read more]
Shannon Hicks replied to the topic Issues with Digi XBee 3 Global Modems in the forum Mayfly Data Logger 7 months, 2 weeks ago
Digi brand boards won’t work with the Mayfly v0.5 boards unless you also use one of the special adapter boards we used to make and sell, but we haven’t used those since 2020 when the Mayfly v1.0 boards came out. The 1.0 and 1.1 Mayfly boards eliminate the need for an adapter between the Digi board and the Mayfly, but you still have to make…[Read more]
caroline@wachusett started the topic Issues with Digi XBee 3 Global Modems in the forum Mayfly Data Logger 7 months, 2 weeks ago
Hello,
Our group ordered the Digi Xbee 3 Global Modems (XB3-C-GM2-UT-001) to connect to our Mayfly boards. We have a combination of 0.5b and 1.1 boards that we use in the field. I have been using a 1.1 board to perform tests on the new modems but I have not had any success uploading the data to Monitor My Watershed. I have attached the sketch I…[Read more]
Discovery_Center started the topic *Fixed* Modular Sensors Library Issues in the forum Monitor My Watershed 7 months, 2 weeks ago
For some reason when I try to insert Modular Sensors as a library and I select it, only loggerbase.h gets included. What can I do?
Heather Brooks started the topic EnviroDIY Workshop: Relocating and Updating a Monitoring Station in the forum Mayfly Data Logger 7 months, 2 weeks ago
There are a few spots left in the free, in-person workshop scheduled for Wednesday, September 10, 2025, at Stroud Water Research Center in Avondale, Pennsylvania. This workshop will focus on relocating a standard Stroud Center EnviroDIY Monitoring Station equipped with the Meter Hydros 21 CTD sensor; however, the skills apply to other contexts in…[Read more]
YorkCoMWS became a registered member 7 months, 2 weeks ago
YorkCoMWS
@yorkcomws