-
John Smutny replied to the topic Mayfly Power Consumption in the forum Mayfly Data Logger 8 years, 4 months ago
Cool, thank you Steve for the measurements, as these will provide enough information to approximate the size of battery I will need
-
John Smutny replied to the topic XBEE Module in the forum Mayfly Data Logger 8 years, 5 months ago
Would there be a way to send data from a Digital pin to a XBEE pin under those principles (for example, take data from pin D4 and send it to XBEE pin DIO4 to be transmitted wirelessly)?
Right now I am trying to using the XBEE port on the Mayfly to transmit data to the Digi Cloud service in order to graph sensor data wirelessly on-site. Moreover,…[Read more]
-
John Smutny replied to the topic Ver 0.3 Mayfly Grove Power Supply in the forum Mayfly Data Logger 8 years, 5 months ago
Done, thank you for the help
-
John Smutny replied to the topic Ver 0.3 Mayfly Grove Power Supply in the forum Mayfly Data Logger 8 years, 5 months ago
Ok, I have checked the datasheets to my sensors and none of them output a voltage greater than 3.3V (2 are digital sensors while another supplies a max of 2.4V), so thanks for the heads up.
Unfortunately, I do not have any experience replacing regulators on a SOT-23 surface mount, therefore I am curious on how soon this replacement process can…[Read more]
-
John Smutny started the topic Ver 0.3 Mayfly Grove Power Supply in the forum Mayfly Data Logger 8 years, 5 months ago
Problem: Haven’t been able to send 5V power to the Digital and Analog Grove Headers. The Headers are constantly supplied with 3.3V
I have a question about the Notice on the Mayfly “Jumper Settings” page regarding the board’s internal boost regulator (here is the note)…
“Note: due to a manufacturing issue on Mayfly version 0.3, some boards have…[Read more]
-
John Smutny replied to the topic Mayfly Power Consumption in the forum Mayfly Data Logger 8 years, 5 months ago
Ok, that sounds good. By the way thank you for being so helpful with the switch error, everything is working fine now
-
John Smutny started the topic Mayfly Power Consumption in the forum Miscellaneous 8 years, 5 months ago
Right now I am trying to power the mayfly using a battery pack, but I am not sure how much power the Mayfly and all of it’s applications (XBEE port, SD card reader) consume. I am only concerned with powering the on board applications, since all external sensors have there own power needs. Are there any references to the power or current…[Read more]
-
John Smutny started the topic Mayfly Power Consumption in the forum Miscellaneous 8 years, 5 months ago
Right now I am trying to power the mayfly using a battery pack, but I am not sure how much power the Mayfly and all of it’s applications (XBEE port, SD card reader) consume. I am only concerned with powering the on board applications, since all external sensors have there own power needs. Are there any references to the power or current…[Read more]
-
John Smutny replied to the topic Low Cost Ambient Water Quality Sensors in the forum Environmental Sensors 8 years, 6 months ago
The mayfly acts in a similar way to other boards, such as Arduino, that can take analog and digital inputs and connect to the mayfly. Through my experimentation, what ever works on Arduino will also work on the mayfly
-
John Smutny replied to the topic Mayfly USB Connection Problems in the forum Mayfly Data Logger 8 years, 6 months ago
That sounds good, thank you for all of your help
-
John Smutny replied to the topic Mayfly USB Connection Problems in the forum Mayfly Data Logger 8 years, 6 months ago
Currently my computer is running on Windows 8, 32-bit, and i am connecting the Board using the provided USB cable from the starter kit, and 3 other cords still have the same problem. But, I haven’t tried programming the board using the FTDI port yet and can test that when I gather the equipment.
In regards to testing whether the switch removes…[Read more]
-
John Smutny started the topic Mayfly USB Connection Problems in the forum Mayfly Data Logger 8 years, 6 months ago
While experimenting with the Mayfly Data logger to upload different Arduino programs from my computer, I came across an issue with the communications between the board and the USB port of my computer. Repeatedly, The computer couldn’t recognize the board and gave me an error message at the bottom right hand corner of my screen saying “USB Device…[Read more]
-
John Smutny started the topic Mayfly USB Connection Problems in the forum Mayfly Data Logger 8 years, 6 months ago
While experimenting with the Mayfly Data logger to upload different Arduino programs from my computer, I came across an issue with the communications between the board and the USB port of my computer. Repeatedly, The computer couldn’t recognize the board and gave me an error message at the bottom right hand corner of my screen saying “USB Device…[Read more]
-
John Smutny became a registered member 8 years, 6 months ago