Activity

@shicks I had a doubt related to the baud rate mentioned in the example sketches which is “115200” but for SDI-12 configuration of TEROS 12 its “1200”. Should I change it? Also if I change the address of the sensor will I be able to obtain data from the data logger provided by METER or do I have to set it to “0” each & every time I have to access…[Read more]

I’ve attached a screenshot from Meter Group’s Teros 12 Integrator Guide.  It shows the wiring scheme for the bare-wire version and the 3.5mm stereo plug version.  If you’ve got the sensor with the 3.5mm plug, then you’ll need to compare this diagram to whatever breakout board you’re using to match the tip, ring, and sleeve to the power, ground, a…[Read more]

@shicks For now I want to connect one Teros 12 but in future want to connect four. Also I have both Mega & Nano with me. The output is an audio jack for which I have bought a trs 3.5mm breakout board. I just want to display the sensor data on my computer & use a esp module to display it on some website for future purposes

How many sensors are you wanting to connect to your Arduino board?  Do you have a Mega, or Nano, or both?  What sort of termination is on the end of your sensors?  Are you just wanting to display instantaneous sensor data on your computer or are you trying to build a logging device?

can you suggest something?

Thanks, Yes, I noticed it came back pretty quickly.

The DNS is now resolving correctly, and I can reach Monitor My Watershed in multiple browsers and devices. If you’re still having trouble, please try purging your browser cache or opening a new private/incognito window. The domain is now set to auto-renew.

Thanks!

Hi @lance-lascari, the domain has been renewed, and access should be restored soon. I’ll keep an eye on it. Thanks!

Thanks for the update.  We’re looking into it, my guess is there’s a conflict between two libraries that is causing some issues, so we’ll have to dig into it and narrow it down.

I wanted to come back to this thread to give an update. I did get this working! I had tried unplugging the modem and even commenting out any code related to the modem, it still would log every minute, so it wasn’t related to that. I had some code from another site that we knew worked, so I tried to use that, but then my version of the Modular…[Read more]

There’s information on this page, in Section 6.2 about the holes for the cable glands: https://www.envirodiy.org/knowledge-base/building-an-envirodiy-monitoring-station/

As mentioned on that page, the 1/2″ NPT cable glands require you to drill a 23/32” hole and tap it with a 1/2″ NPT tap.  I don’t know what the diameter of the cable for your sens…[Read more]

Thank you for that info.

I need to tap another hole for the Turner device and was wondering if you have a size recommendation for a drill tap and waterproof cable gland.