Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Paul Dyer

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016-10-10 at 8:58 PM in reply to: Problem with Arduino IDE loading Mayfly board data from github website #1745
    Paul Dyer
    Participant

      Marion

      I had a similar problem. I assume you are using Arduino IDE 1.6.12, the latest version on the Arduino website. Even though the Getting Started With Mayfly says you can use Arduino IDE 1.6.5 or newer, the current version (1.6.12) does not seem to correctly support the Mayfly. I corrected my problems by downloading and using IDE 1.6.5. Give this a try and let me know if it works for you.

      Regards

      Paul

      2016-10-10 at 5:16 PM in reply to: MayFly initialization problem #1744
      Paul Dyer
      Participant

        I finally figured this out. The latest Arduino IDE (1.6.12) apparently does not support the MayFly. I installed 1.6.5 and got the board up and running using the example sketch. I suggest further investigation and possible modification of the instructions given in Getting Started

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)