Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

David Petry

Forum Replies Created

Viewing 1 post (of 1 total)

Author

Posts
2018-07-23 at 1:09 PM in reply to: Minor Glitch Reading Maxbotix MB7389 with Mayfly #12321
David Petry
Participant
I am also having a similar issue with the MB7989 with MB7955 and EnviroDIY Mayfly. My sensor was deployed for four days, and when I went back to check on it and swap out an SD card, when it turned back on, it would only read a distance of 7389, regardless of the actual distance. I am also interested in any ideas as to how to fix this issue.

For reference, my sensor is mounted in an Agri Drain water level control structure with a v-notch weir to ultimately record flow in gallons per minute discharging from a pond.
Attachments:
Author

Posts

Viewing 1 post (of 1 total)