All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here
Community Activity See all activity
okamran replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 months, 2 weeks ago
Additionally, I have arduino 1.8.19 and it says I have the EnviroDIY Mayfly 1284p on /dev/cu.usbserial-0001. These boards were bought fairly recently. My baud is 57600. I believe I kept most of the pins the same as in the original code. I have my apn set to “hologram”, and the UUIDs are in place and are in the same order as the variables.
[Read more]
okamran replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 months, 2 weeks ago
On the LTE Bee I see more of a carrot orange light and a flashing blue light. Is that what you mean?
Sara Damiano replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 months, 2 weeks ago
If you’re getting a “could not wake modem” error it means there’s something wrong with the modem power or connection between the modem and your main board. Are your modem lights turning on? There should be a solid red light and a flashing blue light? Make sure your board is in the socket correctly with the cut corners at the top and all the pins…[Read more]
okamran started the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 months, 2 weeks ago
I believe I’ve been following all the steps correctly on making our water sensing station, but I can’t get any data to be sent to MonitorMyWatershed. I have just a Hydros 21 Meter sensor and ClariVue 10 sensor, and both read fine, but the data is only being written to my SD card and not online. The EnviroDIY LTE Bee seems to be situated well, and…[Read more]
okamran replied to the topic Cannot Connect to Internet with SIM in the forum Mayfly Data Logger 4 months, 2 weeks ago
Also having the same issues. My LTExBee has an orange and a flashing blue light which I’m pretty sure is a good sign, but I just get that “Could not wake modem for clock sync” message. I’ve tried running the program at least 10 times by now but to no avail. Also the sync session doesn’t take 2 minutes, usually closer to 30 seconds before sending…[Read more]
okamran became a registered member 4 months, 2 weeks ago
okamran
@okamran
Leonardo became a registered member 4 months, 3 weeks ago
Leonardo
@leocosta
Rikaad replied to the topic LTE Bee compatibility with older mayfly boards in the forum Mayfly Data Logger 5 months ago
Hi,
Thanks for the reply, much appreciated.
I have now received an LTE Bee and am having few issues with:
For 2) above when trying to compile the DRWI_SIM7080LTE example, i get the following error:
[Read more]
JGHunter became a registered member 5 months ago
JGHunter
@jghunterjr
JCW became a registered member 5 months ago
JCW
@jill-colemanwasik