All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn about licenses and attribution
Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here
Community Activity See all activity
Shannon Hicks replied to the topic Error Compiling for board EnviroDIY Mayfly 1284p in the forum Mayfly Data Logger 1 year, 1 month ago
It looks to me like the CTD sensor was damaged during whatever event happened on April 5. Unfortunately the sensors are very sensitive to physical damage so you’ll probably need to replace it with a new one.
JK_WCCD replied to the topic Error Compiling for board EnviroDIY Mayfly 1284p in the forum Mayfly Data Logger 1 year, 1 month ago
Hello,
We have been experiencing some issues with our mayfly readings. Attached is an image of one our previous temperature readings over the course of about a month. We are not sure why the readings periodically go haywire and then go back to normal. We are seeing the same inaccurate readings for conductivity and water depth. To give some…[Read more]
piercehamma became a registered member 1 year, 1 month ago
piercehamma
@piercehamma
NZtuna started the topic EnviroDIY LTE Bee Library in the forum Mayfly Data Logger 1 year, 2 months ago
I have been using a mayfly data logger board with SIM800H GPRS to collect, store and send records to an FTP server.
With 2G being phased out where I am, I am contemplating using an EnviroDIY LTE Bee to move to 4G.
Is there a dedicated library<span data-olk-copy-source=”MessageBody”> using the 4G Bee to upload data to an FTP s…[Read more]
NZtuna became a registered member 1 year, 2 months ago
NZtuna
@vaipuhi
José Rogelio Fung Corro became a registered member 1 year, 2 months ago
José Rogelio Fung Corro
@joserfungcorro
dunmoreguy became a registered member 1 year, 2 months ago
dunmoreguy
@dawajo
caroline@wachusett replied to the topic New Xbee Modem: XB3-C-GM1-UT-001 in the forum Mayfly Data Logger 1 year, 2 months ago
Hi Shannon,
Thank you for the quick response and I appreciate your help! If you end up finding out anything, please keep me updated.
Shannon Hicks replied to the topic New Xbee Modem: XB3-C-GM1-UT-001 in the forum Mayfly Data Logger 1 year, 2 months ago
We haven’t had a chance to do further testing on why the Digi modules only worked a few times after startup, but it sounds like you experienced the same thing we did. We’ll see if we can revisit the issue and make sure our existing software examples work with them or if we’ll have to make a few changes.
caroline@wachusett replied to the topic New Xbee Modem: XB3-C-GM1-UT-001 in the forum Mayfly Data Logger 1 year, 2 months ago
Hello,
Thank you for your quick response Bob! To be honest, I am fairly new to working with the Mayfly boards. I was wondering if anyone at EnviroDIY had any luck with the modems since this was initially posted in September and if so, could direct me to an example sketch to use that turns off the 2G fallback. Or if there is any other sketch that…[Read more]