Home › Forums › Mayfly Data Logger › Mayfly with Xbee MTech mDot LoRa module › Reply To: Mayfly with Xbee MTech mDot LoRa module
2021-07-01 at 1:48 PM #15643
Thanks for the reply. I have tried every baud rate for the modemBaud setting. I just tried again with 115200. I get a slightly different response but unfortunately, it’s still not readable.
Waking up the Xbee
Flushing the Serial port
Check what band the module is set for.
Sending command: AT+FREQ
Putting the Xbee to sleep
I don’t have a basic bee carrier card. I will order one and see what the response is from the module there.
Thanks again for the reply!