Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Trouble initializing XBee3 LTE-M

Home › Forums › Mayfly Data Logger › Trouble initializing XBee3 LTE-M › Reply To: Trouble initializing XBee3 LTE-M

2018-10-26 at 12:58 PM #12617
Dan
Participant
    Thank you Shannon.

    OK, I cut the trace and confirmed no continuity between BEE_Vcc and 3v3 at SJ13. Then I made a solder bridge between BEE_Vcc and LIPO. I have ~4.1V between GND and LIPO/BEE_Vcc.