[Noori Nagra]

Hello,

I am still sadly having some difficulties and was wondering if you could help me overcome them.

This is the output I am recieving:

Now running DRWI_SIM7080LTE.ino on Logger Logger_George

Hello,

I am still sadly having some difficulties and was wondering if you could help me overcome them.

This is the output I am recieving:

Now running DRWI_SIM7080LTE.ino on Logger Logger_GeorgeSchool_Creek

Using ModularSensors Library version 0.34.0
TinyGSM Library version 0.11.5

Logger timezone is set to UTC -5
RTC timezone is set to UTC
Current RTC time is: 2024-03-26T18:13:54-05:00
Current localized logger time is: 2024-03-26T13:13:54-05:00
TurbHigh has a non-unique UUID!
Battery has an invalid UUID!
BoardTemp has an invalid UUID!
dccb783f-477b-45f4-846c-9f4e9245a9bc -> Hydros21cond
3de9d1c9-642e-4b60-b45b-07d718261ff6 -> Hydros21temp
6e56ba5a-8ba2-4ba1-bd3e-240cd25fa4c0 -> Hydros21depth
fbfdb500-c8dc-4c4e-9de8-1a8828e3b4f6 -> TurbLow
-> TurbHigh
-> Battery
-> BoardTemp
-> signalPercent

This logger has a variable array with 8 variables, of which 7 come from 5 sensors and 1 are calculated.
Sampling feature UUID is: 21815a48-9cf3-4e20-84af-39dd1dda7397
Logger portion of setup finished.

Setting up sensors…
Waking modem and setting Cellular Carrier Options…
Attempting to connect to the internet and synchronize RTC with NIST
This may take up to two minutes!
Clock already within 5 seconds of time.
Setting up file on SD card
Data will be saved as Logger_GeorgeSchool_Creek_2024-03-26.csv
Putting processor to sleep

I think that the problem is coming from my UUIDS and Modem. Out of all of the UUIDS on the variable list, I don’t have both ones for the turbidity sensor, I only have one, where can I find the two for TurbLow and TurbHigh. Further, I don’t have the DS3231, Battery, or Signal Percent UUIDS. Where can I locate these?

Thank you so much!

Noori

 

 

More...

Less...

[Noori Nagra]

Wow, thank you so much! I am very grateful for all of the help.

[Noori Nagra]

A CTD sensor (Decagon) and turbidity sensor (Campbell OBS3).

[Noori Nagra]

Hello!

Thank you for being so willing to help. I am using the Mayfly version 1.1 and the wifi/cell board is the Envirodiy LTE Bee. I am attempting to run the Modular Sensor code of Menu a la Carte on

Hello!

Thank you for being so willing to help. I am using the Mayfly version 1.1 and the wifi/cell board is the Envirodiy LTE Bee. I am attempting to run the Modular Sensor code of Menu a la Carte on Arduino and have made some adjustments mostly in cutting out unnecessary sensors.

Thanks!

More...

Less...

[Author]

Posts