Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

John

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023-05-03 at 12:47 PM in reply to: Hyrdos 21 Gen2 – Can’t Change Address #17782
    John
    Participant

      Thanks, Shannon.

      I did double check the things you mentioned.  And as I said, this whole setup just worked when I did it with different gen 2 Hydros sensors in January.  Still not having any luck.

      Are there other things to try?

      2022-09-19 at 11:17 AM in reply to: Problems with a combined MH21 Gen1 and Gen2 station #17345
      John
      Participant

        Ah!  Some pieces are coming into clearer focus.

        Thanks!

        2022-09-19 at 10:39 AM in reply to: Problems with a combined MH21 Gen1 and Gen2 station #17343
        John
        Participant

          Thanks, Shannon.  I think I get it.  🙂

          Just out of curiosity, is this new?  Or is it something that just became an issue because of trying to run the two different generations of sensor that way?  It was working fine with the two Gen1 sensors written as it is.  I suppose I’m trying to figure out if I just got lucky originally.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)