Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Mayfly sketch compiles, seems to upload, but doesn’t

Home › Forums › Mayfly Data Logger › Mayfly sketch compiles, seems to upload, but doesn’t › Reply To: Mayfly sketch compiles, seems to upload, but doesn’t

2023-08-14 at 4:00 PM #18025
Sedhead
Participant

    Alright, I have no idea if this will help or not, but I think it’s important that I get this down for completeness.

    1. If I open the public repo that I shared above in VSC from Github Desktop, then copy the sketch into it that I need to load, it seems to compile and upload. So, as of right now, I have my sketches loaded onto my boards and they are cranking away.
    2. However, I don’t want to share my passwords and such in a public repo. So, I duplicated the public repo above following the guidelines here. When I open that repo and try to compile or upload the very same sketches in the duplicate, private repo, I get the same problem of them not compiling and uploading, as above.

    I tried going back in time on Platformio to see if the new version of it was causing this problem, but that’s not it. There seems to be something going on between VSC and Github. Changing the private repo to public doesn’t change the bad behavior.