Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Mayfly v1.1 technical questions forum thread

Home › Forums › Mayfly Data Logger › Mayfly v1.1 technical questions forum thread › Reply To: Mayfly v1.1 technical questions forum thread

2023-03-17 at 7:45 AM #17696
Shannon Hicks
Moderator

    The sensor manufacturer has assured me that the sensors will work at 3.3v, and we’ve had experience with hundreds of them and concur, but they’ll also work just fine with the jumper set to 5v instead, so it’s your choice.

    This thread is for overall technical questions about the hardware on the Mayfly v1.1 boards, so if you have other questions about code or specific sensors, it would be best to start a new thread for those topics.