Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, a web toolkit designed to help citizens, conservation practitioners, municipal decision-makers, researchers, educators, and students advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here

Reply To: Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a

Home Forums Environmental Sensors Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a Reply To: Please Help! Meter CTD Gen2 being blocked by Yosemitech 511-a

#17569
James_NZ
Participant

    Thank you both for your reply.  Okay, so it seems that I may be barking up the wrong tree with that one.  I will try Sara’s build flag to see if that works, but I’m not holding my breath.

    I have my SDI12 jumper pins for the CTS set on 5v.  Could this be the problem?  For some reason I couldn’t get the Gen1 CTD’s to work at 3.3v, but they worked at 5v so I set them all as that.

    FYI, I am using the modbus wing-shield here:

    https://github.com/EnviroDIY/Mayfly-Modbus-Wing/tree/master/Modbus-Mayfly_WingShield

    Thanks again for your help.

    James