Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: RTC Interrupt

Home › Forums › Mayfly Data Logger › RTC Interrupt › Reply To: RTC Interrupt

2016-06-06 at 3:43 PM #1550
Shannon Hicks
Moderator

    Yes, if you’d prefer to use the hardware D10 interrupt, just cut the trace and solder a jumper over to the D10 pin on the header row. Then you can use “INT2” as the interrupt.