Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Connecting Bare Wire Sensor to Jack Adapter

Home Forums Mayfly Data Logger Connecting Bare Wire Sensor to Jack Adapter Reply To: Connecting Bare Wire Sensor to Jack Adapter

#15223
Cheryl Nolan
Participant

    I called Meter Group tech support because my manual only showed the 3.5mm jack connection, bare wires were not addressed and they confirmed your connection, Shannon. (red to D2, white to Vcc, and black to GND) I also had a 4th bare wire that he told me to wrap with electrical tape and tape it out of the way so it can’t cross other connections. He did say that they would be changing the color scheme.

    Thanks everyone!