Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, a web toolkit designed to help citizens, conservation practitioners, municipal decision-makers, researchers, educators, and students advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here

Reply To: SDI-12 Change Address for Meter Hydros 21 CTD Sensor

Home Forums Environmental Sensors SDI-12 Change Address for Meter Hydros 21 CTD Sensor Reply To: SDI-12 Change Address for Meter Hydros 21 CTD Sensor

#13079
dan@wachusett
Participant

    Yes, this is a brand new board.
    The microSD card is not the issue – I have switched cards and get the same result. Both cards work fine if used alone.
    I believe the problem lies in the circuitry between the two SD card slots… When only 1 card is inserted (either slot) the board powers on. If both slots have microSD cards inserted simultaneously – no power.
    As an extra test, and to isolate the problem, I unplugged everything else from the board except the usb cable to the computer – I get the exact same behavior.