Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: data.envirodiy.org destination IP address

Home Forums Mayfly Data Logger data.envirodiy.org destination IP address Reply To: data.envirodiy.org destination IP address

Steve Ochs

    @dave-eiriksson Those are the same settings I have in my XBee S6B. I attached screen shots below of my settings from XCTU (I deleted my personal network information). I have found by watching the diagnostics in the serial monitor that the S6B doesn’t connect very reliably to wifi to POST after making changes and uploading. Sometimes it requires a power cycle to reset it after uploading. Are you verifying using XCTU that the correct parameters are stored in the XBee and that the sketch isn’t overwriting them with something different? What kind of feedback are you seeing in the serial monitor?