Home › Forums › Mayfly Data Logger › Trouble initializing XBee3 LTE-M › Reply To: Trouble initializing XBee3 LTE-M
2019-01-29 at 3:44 PM #12759
Shannon soldered a jumper on a board for me to connect the reset pin to a data pin on the Mayfly’s mcu so I could try it with the XBee.
Unfortunately, it won’t work if you’re powering the XBee off of the battery (ie, w/ solder jumper 13). Erm… or rather, unfortunately, the board I had her put the jumper on seems to have gone very flakey. It works on a different board.