Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Activity

  • kevin ryan posted an update in the group Researchers 6 years, 1 month ago

    I am searching for recommendations and resources to construct a low-cost ultrasonic water level sensor for use with trapezoidal flumes on small streams

    • Hi Kevin, we are using and like the sensors from Maxbotix. Here’s an old blog post by @shicks to see one compact enclosure option: https://envirodiy.org/ultrasonic-water-depth-sensor/.

      (the forum limits how many links I can give you, so this will come in several posts)

      • https://www.maxbotix.com/Ultrasonic_Sensors/MB7389.htm has a range of 30-500 cm.
        https://www.maxbotix.com/Ultrasonic_Sensors/MB7386.htm has a range of 50-1000 cm.
        https://www.maxbotix.com/Ultrasonic_Sensors/MB7955.htm makes temperature compensation integrated with the MaxSonar (and there’s a solder it yourself kit for 1/3 cost).

        • Scripts are available in the modular sensor repo: https://github.com/EnviroDIY/ModularSensors

          Also notable, we like to drill and tap plastic enclosures and screw the MaxSonar straight into the enclosure.
          https://github.com/EnviroDIY/EnviroDIY_Mayfly_Logger/blob/master/hardware/1120Pelican_enviroDIY_5.pdf

          Let me know if you have other questions. Sorry it took a few days for you to get a response!
          Beth

          • I have a couple of high school students making a water-depth sensor with the MB7389 ultrasonic sensor and a Mayfly data logger. The information you posted has been very helpful. We are also using the Pelican 1120 case. The problem we are having is attaching the case/MB7389 to the top of the 4″ PVC pipe that we are using for a stilling well. Any suggestions?

            • Hi Kevin, I’m not sure about an elegant way to mount a pelican case to the pipe. My current cases are all pole mounted with two 10″ zinc mending plates mounted to the back of the Pelican case using bonded sealing washers to keep the case dry. Then the mending plates are mounted to a post in the ground. If you have only ultrasonic sensors on the well, I think what @shicks did here is very elegant and way less expensive than Pelican cases: https://envirodiy.org/ultrasonic-water-depth-sensor/

            • Thank you. I checked out the link, that is very nice. Right now we only have the ultrasonic sensor, but I wanted to add temperature sensors for water and air. In the future, we might add a rain gauge.

            • Kevin, I was just thinking, how about mounting a PVC end cap to the back of the pelican case (so the door of the case is on top) and drill and tap the PVC and case to accommodate the ultrasonic sensor? It would look something like the one linked above, but roomier. Then you have the case mounted as a sort of well cap and you have room to add additional sensors as needed to the system over time (by tapping with cord grips as needed). It seems like it would be pretty trivial to create a clamping system on the outside of the the well to hold the pelican case/cap on the top of the well in a stable way. The 1120 case is pretty small. (P.S. we should really be having this discussion in a forum so it’s searchable in the future by others!)