Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Breeves23

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016-06-16 at 11:37 AM in reply to: Mayfly USB Connection Problems #1565
    Breeves23
    Participant

      As an update, I am getting this same problem on a Windows 7 machine, and 2 different Linux machines. Under the devices, it is listed as unknown, and the auto search is not finding the driver. When I try to connect or upload a sketch, I get this error: avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x2e

      2016-06-16 at 9:43 AM in reply to: Mayfly USB Connection Problems #1564
      Breeves23
      Participant

        I am having problems accessing the Mayfly Data Logger in Windows 10. When plugged in, it is not recognized, nor can Windows find a driver. I do have the Arduino IDE installed, as well as the board files for the Data Logger. I tried downloading the basic FTDI driver files from FTDIchip.org, however when opening the serial port only gibberish is displayed, and I still cannot write a sketch. Any place I can find the correct drivers?

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)