Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Mayfly sketch compiles, seems to upload, but doesn’t

Home Forums Mayfly Data Logger Mayfly sketch compiles, seems to upload, but doesn’t Reply To: Mayfly sketch compiles, seems to upload, but doesn’t

#18019
neilh20
Participant

    great  makes it easy to try it –

    I cloned locally, opened the folder in VSC.

    It pulled in the libs, and then I pressed the pio build button.

    Advanced Memory Usage is available via “PlatformIO Home > Project Inspect”
    RAM: [=== ] 34.9% (used 5724 bytes from 16384 bytes)
    Flash: [======= ] 65.5% (used 85196 bytes from 130048 bytes)
    Building .pio\build\mayfly\firmware.hex

    I’m just finished some other testing so my Mayfly was open, and I downloaded it

    avrdude: 85196 bytes of flash written

    Very occasionally I’ve had problems with pio getting out of sync or something.  Perhaps you want to uninstall VSC. Then from the platformio page reinstall.

    https://platformio.org/install/ide?install=vscode