Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of Home › Forums › Mayfly Data Logger › Mayfly 1.1 Bootloader Burning? › Reply To: Mayfly 1.1 Bootloader Burning?
2022-12-29 at 9:00 AM
#17510
An update: I got the Tag Connect socket and it works fine on my Pololu Atmel ICSP programmer, and using it burning bootloaders and program Mayflys is fast and fun.
I am still sorting through my test
An update: I got the Tag Connect socket and it works fine on my Pololu Atmel ICSP programmer, and using it burning bootloaders and program Mayflys is fast and fun.
I am still sorting through my test results and will probably have to do a new battery of tests with an external datalogger because the internal ADC gets confused by low voltages, but regardless of that data, I don’t think that setting the brownout fuse to 1.8V is a solution to many problems one might encounter. In particular to the Mayfly, it does seem not help with the long-wire input capacitance problem that can cause reset loops.
