Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of Home › Forums › Environmental Sensors › MayFly Capability with Northern Widget Walrus Sensor › Reply To: MayFly Capability with Northern Widget Walrus Sensor
2020-11-02 at 11:17 AM
#14766
They are good values and slightly vary. I have verified the output with the MPL115A2 sensor that I have and the values are the same.
They said that the 3m cable works great with their data loggers on
They are good values and slightly vary. I have verified the output with the MPL115A2 sensor that I have and the values are the same.
They said that the 3m cable works great with their data loggers on I2C protocol, but yes it would make sense to use an RS485 to just be sure that the signal won’t be lost over the length.
