Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of Home › Forums › Mayfly Data Logger › Mayfly SCL and SDA voltage level › Reply To: Mayfly SCL and SDA voltage level
2020-08-07 at 11:25 AM
#14460
Matt is correct, the pullup resistors on the I2C bus on the Mayfly board are soldered to the board and can’t be disabled unless you want to unsolder them, which will cause issues if you try to u
Matt is correct, the pullup resistors on the I2C bus on the Mayfly board are soldered to the board and can’t be disabled unless you want to unsolder them, which will cause issues if you try to use I2C devices on the Mayfly like the DS3231 clock or the ADS1115 aux A/D.
