Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Activity

jbiddle replied to the topic Editing Variable UUIDs in the forum Monitor My Watershed 3 years, 11 months ago

I totally understand. I’m thankful that I’m still able to work full time from home it has been incredibly challenging. But I totally get it and it it’s totally understandable. Thanks again for taking the time to help me with this.

The lib_dep part of the platform.ini says:

lib_deps =
    EnviroDIY_ModularSensors@0.23.16
;  ^^ Use this when working from an official release of the library
;    https://github.com/EnviroDIY/ModularSensors.git#develop
;  ^^ Use this when if you want to pull from the develop branch

So should I replace the whole line that says “EnviroDIY_ModularSensors@0.23.16” with the link?
- Sara Damiano replied 3 years, 11 months ago
  
  Correct. Or you can just add a semi-colon in front of the “ModularSensors” line and remove the semi colon from the link’s line.
  - jbiddle replied 3 years, 11 months ago
    
    Thank you. Once I do that, do I need to do anything to update the board?
    - Sara Damiano replied 3 years, 11 months ago
      
      You should be able to just reprogram it with the same program. If that errors, let me know.
      
      jbiddle replied 3 years, 11 months ago
      
      Thanks Sara. This is the monitor output in testing mode now:
      
      ——————————————
      Current logger time is 2020-05-11T10:47:22-05:00
      ———————–
      CampbellOBS3 at ADS1115_0x48_Channel0 reports turbidity is 1.13185 nephelometricTurbidityUnit
      CampbellOBS3 at ADS1115_0x48_Channel1 reports turbidity is 1.02158 nephelometricTurbidityUnit
      EnviroDIY Mayfly at EnviroDIY Mayfly reports batteryVoltage is 4.867 volt
      MaximDS3231 at I2C_0x68 reports temperatureDatalogger is 21.25 degreeCelsius
      RSSI is calculated to be 0 decibelMiliWatt
      signalPercent is calculated to be 0 percent
      ———————–