“Attempting to connect to the internet and synchronize RTC with NIST
Could not connect to internet for clock sync.”

This is exactly what I have for the lib_dep portion of the…[Read more]

——————————————
Current logger time is 2020-05-11T10:47:22-05:00
———————–
CampbellOBS3 at ADS1115_0x48_Channel0 reports turbidity is 1.13185 nephelometricTurbidityUnit
CampbellOBS3 at ADS1115_0x48_Channel1 reports turbidity is 1.02158…[Read more]

The lib_dep part of the platform.ini…[Read more]

Is there something I could do in the meantime while you work on the testing mode update?  Is there a way I can try to fix the connection issue without using the testing mode? Thanks.

I just wanted to check in to see if you have had any luck with updating the libraries for this. Thanks.

Thanks so much for your help. Making those changes to the code you last mentioned worked and it compiled successfully! I was able to upload to the board and that feels like a huge step. Thank you! I’m now monitoring the output from the board on VScode and everything seems to be in order except for the sim card. You can see in the…[Read more]

It’s obvious that the code is just missing various braces, brackets, semicolons and the like. I was under the impression that I…[Read more]

I’ve attached the most recent error message and the code as it exists right now. The first “serial” that it mentions in the error on line 242 is the first “serial” under the Main Setup Function section of the code. It doesn’t look like I’m missing any closing braces so I’m not sure what the issue is…[Read more]

I ran that command in the PlatformIO terminal and was met with another error which I’ve attached here. Once again thanks for taking the time to walk me through this. Hopefully we’re near the end of troubleshooting!

I then went back and tried to “build” the program and ended up with a few errors. I’ve again attached the output in a txt file.

That’s alright, thanks for taking the time to walk me through this. I wish I had a bit more experience doing this…[Read more]

pio lib -g install https://github.com/EnviroDIY/Libraries.git#platformio

into the platformio terminal, and have received  this error: Error: Please install Git client from…[Read more]

Not sure what I was doing wrong initially but I’ve managed to get platformIO installed correctly on VSCode and I’m ready to proceed.

For step two of your instructions above – “2. After your project is created, delete the contents of the new platformio.ini file and replace them with the contents of the same file from the folder where you…[Read more]

Thanks. I’ve tried that and am met with “Invalid path to python interpreter.”

The path is C:UsersJosh BiddleAppDataLocalProgramsPythonPython38-32

So, that helped to eliminate most of the compiling error that I was receiving. I’ve attached the error message as I’m getting it right now.

As for the libraries, I’m 99% sure I’ve deleted all duplicate versions of the libraries, so i’m not sure where it is finding the duplicate versions. I’d be happy to try out using PlatformIO. Going…[Read more]

Thanks for your response. I once again had to put this on hold for a bit but I am back to trying to get it to work.

As I’ve mentioned I am new to this type of thing, but I really think I’ve hit a wall here, and am wondering if I could benefit from a bit more in-depth help. I’ve followed the directions as closely as I could and…[Read more]

I unfortunately had to put this project on hold right after you help me with my last problem, so sorry for the late response.

I managed to fix the library issue I was having (they were stored in the wrong subfolder), and I have a few new questions if you are able to help.

When editing the UUIDs for each variable…[Read more]

I’ve been out of the office and am just now getting back around to trying to set up our data logger. This is my first time trying to set up one of these data loggers, and possibly more importantly is my first time working with Arduino, so I’m still working on understanding everything.

In the DRWI_CitSci sketch I…[Read more]

I am currently attempting to edit the variable UUIDs in the DRWI_CitSci sketch with those for the sensors that are part of my system. In the sketch there are default UUIDs provided for each variable, including those for a CTD sensor. I’m not using a CTD sensor – can I just delete those lines from my sketch or should I keep them in with the…[Read more]

I am now trying to edit the UUIDs in the sketch for each of my variables, except I don’t have the CTD sensor as part of this system. Can I simply remove those lines in the sketch for the CTD sensor, or should I leave them in place with the default UUIDs that are provided?

This is my first time attempting to set-up a Mayfly (with the Campbell OBS3+ sensor) and I have almost no experience so please bare with me.

I’ve been following the steps as laid out in the in Mayfly sensor station manual, and right now I’m attempting to upload the DRWI_CitSci.ino sketch. The directions on the github page here:…[Read more]