-
BrianJastram replied to the topic Data Dropped Between Mayfly and MMW (2.4%) in the forum Monitor My Watershed 4 years, 5 months ago
<I added and set the MS_SEND_BUFFER_SIZE to 750.
I’ll keep monitoring the data and keep you informed.
Thanks again. -
BrianJastram replied to the topic Data Dropped Between Mayfly and MMW (2.4%) in the forum Monitor My Watershed 4 years, 5 months ago
<This is the output from the PUBLISHER_DEBUGs
<I’m not aware of any variable numbers getting truncated.------------------------------------------ /---- Line Saved to SD Card ----/ 2019-11-14 15:10:00,-9999.00,4.715,26.75,0,0 Sending data to [ 0 ] data.envirodiy.org Outgoing JSON size: 319 <--EnviroDIYPublisher Connecting client…
-
BrianJastram replied to the topic Data Dropped Between Mayfly and MMW (2.4%) in the forum Monitor My Watershed 4 years, 5 months ago
Answers:
<Yes, 4 separate Mayfly’s
<WiFi is real (no hot-spot)
<3 loggers (2 cell and 1 WiFi) at same office, 4th logger is miles away
<The timing of the holes doesn’t necessarily match up
<I have changed modem settings with XCTU on one modem from airplane mode to Normal operation. I have also updated their firmware to the newest version, 11413
<I…[Read more] -
BrianJastram replied to the topic Data Dropped Between Mayfly and MMW (2.4%) in the forum Monitor My Watershed 4 years, 5 months ago
Yes, some.
All 4 modems are in transparent mode and there are no gaps on the SD card. The issue is on both the WiFi (1) and cellular (3) modems and the gaps are there in the data in all 3 ways I view the data on MMW except sparklines because those don’t show small gaps. Regarding Hologram some of my data sessions have no data consumption and some…[Read more] -
BrianJastram started the topic Data Dropped Between Mayfly and MMW (2.4%) in the forum Monitor My Watershed 4 years, 5 months ago
I’ve got 3 XBee LTE-M modems and an XBeeS6B WiFi modem all regularly transmitting data at 5 minute intervals to MMW. Is there any reason why I’m seeing about 97.6% of those data points make it through to MMW instead of 100%?
-
BrianJastram replied to the topic Trouble registering with LTE-M network on Hologram in the forum Miscellaneous 4 years, 6 months ago
Adam, Maybe give ModularSensors 0.23.11 a try. See https://www.envirodiy.org/topic/response-code-504-sending-data-to-data-envirodiy-org/
It’s kind of working for me and Dan. Currently though I’m getting exactly 24 hour gaps in my data stream to MMW. -
BrianJastram replied to the topic Response code 504 sending data to data.envirodiy.org in the forum Monitor My Watershed 4 years, 6 months ago
Fantastic! That’s just great. It feels good to have helped.
-
BrianJastram replied to the topic Response code 504 sending data to data.envirodiy.org in the forum Monitor My Watershed 4 years, 6 months ago
Dan,
That is so frustrating. It sounds like you are making good efforts at troubleshooting.
Besides trying ModularSensors Library version 0.23.11 and checking that the *.ino file and Platformio.ini file are not conflicting I’m running out of ideas. You’ve got your modem connected to the internet but that MMW connection just ins’t happening.
You…[Read more] -
BrianJastram replied to the topic Response code 504 sending data to data.envirodiy.org in the forum Monitor My Watershed 4 years, 6 months ago
Dan,
I’m using Platform IO.
I assume you’re talking about the ‘Recent Data Sessions Table’ when you referenced the hologram activity log. I use that also and have noticed (and submitted a ticket for the fact) that when my data makes it through to MMW a single data session uses about 2-3 K bytes of data and all these other times I’m experiencing…[Read more] -
BrianJastram replied to the topic Response code 504 sending data to data.envirodiy.org in the forum Monitor My Watershed 4 years, 6 months ago
Dan,
My output looks like this:
Sending data to [ 0 ] data.envirodiy.org
POST /api/data-stream/ HTTP/1.1
Host: data.envirodiy.org
TOKEN: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Content-Length: 318
Content-Type:…[Read more] -
BrianJastram replied to the topic Response code 504 sending data to data.envirodiy.org in the forum Monitor My Watershed 4 years, 6 months ago
Maybe it’s a ModularSensors Library problem. I’m using version 0.23.11
-
BrianJastram replied to the topic Data Gap When Voltage is Low in the forum Mayfly Data Logger 4 years, 7 months ago
I think the main problem right now is that the modem data session lasts about the whole length of the logging interval. The cell modem seems to stay on and connected too much.
-
BrianJastram replied to the topic Data Gap When Voltage is Low in the forum Mayfly Data Logger 4 years, 7 months ago
OK, I see, thank you, that makes sense. I should be able to extend the time of >3.65V by increasing my logging interval from 5 to 30 min. I’ll keep that ‘attempt to re-send data’ project in mind as I gain experience and availability.
-
BrianJastram started the topic Data Gap When Voltage is Low in the forum Mayfly Data Logger 4 years, 7 months ago
When my Mayfly voltage is <3.65 it is programmed to just log data and not publish (to MMW via DigiXBeeCellular)? When the voltage is good again why doesn’t it send all the data that were logged in the interim? This is a remote site so I haven’t checked to see if the data are on the SD card. The logging interval is 5 min. (I’m planning to increase…[Read more]
-
BrianJastram replied to the topic GPRSBee in the forum Mayfly Data Logger 5 years, 2 months ago
Dave,
I bought the PulseLarson W3554B0140 RF ANT 829MHZ/2.2GHZ PCB TRACE (https://www.digikey.com/products/en?keywords=553-2574-ND) and I’m pretty sure it works. It looks like the one that comes with the Development kit (https://www.digi.com/products/models/xk3-c-n1-ut-e).
-
BrianJastram replied to the topic GPRSBee in the forum Mayfly Data Logger 5 years, 2 months ago
mdean,
I want to try those things but don’t have enough experience yet to know exactly how. When you reference TinyGSM (increasing the timeout time) what exactly do you mean by TinyGSM? And defining the modem serial at 9600 is understandable except I don’t see where to do that (in my logging_to_EnviroDIY sketch or in a different sketch that sets…[Read more]
-
BrianJastram replied to the topic GPRSBee in the forum Mayfly Data Logger 5 years, 2 months ago
Cal,
I have the hardware:
Mayfly Datalogger v0.5b
Digi XBee3 Cellular Lte-M/NB-Iot – XB3-C-A2-UT-001
No antenna – 3 bars of AT&T on my iphone
Soldered SJ13 and cut trace BEE-Vcc to 3v3 – 4.19V between Bee pins 1 and 10
3.7v Lipo battery
Solar panel from mayfly startup kit
USB to Windows PC – XCTU installed but not implemented
Hologram SIM…[Read more] -
BrianJastram became a registered member 5 years, 3 months ago