All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water. New to EnviroDIY? Start here
Community Activity See all activity
Shannon Hicks replied to the topic LTE Bee compatibility with older mayfly boards in the forum Mayfly Data Logger 1 weeks, 1 days ago
Yes, the EnviroDIY sim7080 LTEbee module is compatible with the previous versions of the Mayfly board. There are no hardware changes to do, but you will have to edit your code slightly. The v1.x boards control power to the Bee socket (bee header pin 1) by using the the Mayfly’s D18 pin, allowing you to completely turn the 3.3v supply to the b…[Read more]
Rikaad started the topic LTE Bee compatibility with older mayfly boards in the forum Mayfly Data Logger 1 weeks, 2 days ago
Hi,
Is the LTE Bee (sim7080G modem) compatible with older Mayfly data-logger boards? I read in some documentation that it could be used with Mayfly V0.5b boards with minor changes to code. Is it also compatible with Mayfly 0.4/0.5 boards, if so what hardware/code changes need to be made?
Any help is much appreciated.
Cheers.
Rikaad became a registered member 1 weeks, 2 days ago
Rikaad
@enviro
LittleManistee replied to the topic Intermittent Data to SD Card in the forum Mayfly Data Logger 1 weeks, 6 days ago
I have replaced the Micro SD card and the battery with new. I used the recommended battery and fully charged it before installation. I have been using the horizontal on board micro SD card socket all along. So I added a new vertical Micro SD card socket I had on the shelf. I get no change. A few times it has told me the file belongs to ano…[Read more]
Steven Goldsmith became a registered member 2 weeks ago
Steven Goldsmith
@steven_goldsmith
nick started the topic Weather Station in the forum Mayfly Data Logger 2 weeks, 1 days ago
Hi, Has anyone successfully integrated a weather station with their Mayfly data logger? If so, do you have recommendations on what works best or what I should look out for? In GitHub (ModularSensors » Examples Using ModularSensors » Everything at Once – a la carte » Example showing all possible functionality | ModularSensors0.36.0), I see this “&…[Read more]
caroline@wachusett replied to the topic New Xbee Modem: XB3-C-GM1-UT-001 in the forum Mayfly Data Logger 2 weeks, 1 days ago
Hi Shannon,
I was wondering if you had a chance to revisit the Digi modules and if so, did you have any success?
Thank you,
Caroline
Shannon Hicks replied to the topic Intermittent Data to SD Card in the forum Mayfly Data Logger 3 weeks ago
Have you replaced the battery pack with another, fully-charged one? Sometimes when they are going bad (the metal under the battery’s plastic wrapper rusts after a few years in enclosures with condensation issues) they can cause intermittent power outages, which are sometimes hard to detect if your solar panel is capable of supplying enough power…[Read more]
LMU started the topic SDI12 Library with NANOESP32 in the forum Other Data Loggers 3 weeks ago
<span class=”HwtZe” lang=”en”><span class=”jCAhz ChMk0b”><span class=”ryNqvb”>Hello, </span></span></span>
<span class=”HwtZe” lang=”en”><span class=”jCAhz ChMk0b”><span class=”ryNqvb”>I want to use the ARDUINO NANOESP32 with the adapter from IRROMETER.</span></span> (https://www.irrometer.com/pdf/426.pdf). <span class=”jCAhz”><span…[Read more]
LMU became a registered member 3 weeks ago
LMU
@dzech